Download O-KAM Pro APP
Scan the QR code to download the APP. Or search for “O-KAM Pro ” to download through the app store (Google play/ APP Store).
Table of Contents
Registering and Login to O-KAM Pro
1. Click “Register now” at the login interface
- Select the address
- Enter your phone number
- Get the verification code.
2. After entering the verification code, set the password and click Finish.
Connecting the O-KAM Pro Camera
1. Log in and click “Add” button found at the “Home” interface or click the “+ ” in the upper right corner.
2. At the QR code scanning interface, scan the QR code on the o-kam pro camera.
(The following two O-KAM Pro cameras are used as a demonstration. Other camera types are connected in the same way.)
3. Switch the camera “On”. (No need for “Long press”) Click “Next” when the indicator light flashes in blue slowly.
4. Confirm that the camera is ready for WiFi configuration when the indicator light flashes in blue slowly. And click “Next”
5. Enable the location service of your phone, and allow the O-KAM APP to access the location. Confirm the WiFi and enter the password.
* Make sure the Wi-Fi is 2.4 Ghz. WiFi password case sensitive
6. The APP will automatically generate a QR code. Point the camera lens at the QR code and keep it at a distance of 6-8 inches. You’ ll hear a beep and voice prompt when it’s scanned successfully.
7. When the device is connected to the WiFi, name the camera and click “Bind Now”.
8. Please take the camera and phone to the location where you’re going to install the camera, and then click “Next” to test the signal strength.
Make sure there is strong WiFi signal strength at the location.
Share the O-KAM Pro camera
Enter the system settings ” 
“- Share
Sharing method: Share the QR code to a user. The other user adds the camera by scanning the QR code;
The QR code is valid for 30 minutes, and one QR code can only be shared with one user.
Generate more QR codes for more members. Maximum of 4 people can live view.
Monitoring settings
Enter system settings ““-monitoring function
Tap on the “Device Health”- “Firmware”to update (Suggested)
